• Best quality
  • Quick assembly
  • Longevity

HeatBloC®

Heating

technology

Low-loss header MVW DN 25 (1")

for boilers with integrated pump

SKU
3442x3
Prices are only visible for registered users.

Our offer is exclusively aimed at corporate clients.

Operating data
Max. operating temperature: 110 °C
Max. operating pressure: 6 bar
Temperature difference: K
Dimensions
Nominal diameter: DN 25 (1")
Installation height: 156 mm
Centre distance: 125 mm
Height insulation: 127 mm
Materials
Valves and fittings: Brass
Gaskets: EPDM
Insulation: EPP
By means of the conversion kit (item no. 34431), the modular distribution manifolds get a bypass which connects the flow and return line without causing any resistance (low-loss header).
It must be considered that the pump of the boiler circuit must deliver a higher flow rate than the consumer pumps need in total.Otherwise, unwanted circulations occur on the right or left end of the low-loss header.In that case a hydraulic separator (item no. 344203 or 344213) must be installed below a distribution manifold.

Please note:
When you plan the system you must already check whether a low-loss header can be used.In combination with central heating boilers, hydraulic separators must be installed below / upstream of a distribution manifold as the boiler delivers a flow rate with a high temperature difference (leads to unwanted circulation in low-loss headers).