- Best quality
- Quick assembly
- Longevity
HeatBloC®
Heating
technology
Fitting for heat flowmeter DN 32 for mixed HeatBloC®s
- for heat flowmeters with the dimensions 1" ext. thread x 130 mm
Scope of delivery:
- Screw-in fittings flat sealing
- Adapter pipe
- Reducers for immersion sensor (¼" ext. thread, self-sealing x M10 x 1" int. thread and ¼" ext. thread, self-sealing x M12 x 1.5" ext. thread)
- Non-return valve for mixing valve return
- Seals
- for heat flowmeters with the dimensions 1" ext. thread x 130 mm
Scope of delivery:
- Screw-in fittings flat sealing
- Adapter pipe
- Reducers for immersion sensor (¼" ext. thread, self-sealing x M10 x 1" int. thread and ¼" ext. thread, self-sealing x M12 x 1.5" ext. thread)
- Non-return valve for mixing valve return
- Seals
Safety instructions The installation and commissioning as well as the connection of electrical components require technical knowledge commensurate with a recognised vocational qualification as a fitter for plumbing, heating and air conditioning technology, or a profession requiring a comparable level of knowledge [specialist]. The following must be observed during installation and commissioning: - relevant local and national regulations - accident prevention regulations of the professional association - instructions and safety instructions mentioned in these instructions.
NOTICE Material damage due to mineral oils! Mineral oil products cause lasting damage to seals made of EPDM, whereby the sealant properties get lost. We do not assume liability nor provide warranty for damage to property resulting from sealants damaged in this way. - It is imperative to avoid that the EPDM sealing elements of the unit get in contact with substances containing mineral oils. - Use a lubricant based on silicone or polyalkylene and free from mineral oils, such as Unisilikon L250L and Syntheso Glep 1 of the Klüber company or a silicone spray.
ATTENTION The PAW fitting for heat flowmeter must only be used in heating circuits filled with heating water according to VDI 2035 / Ö-Norm H 5195-1. The fitting for heat flowmeter must not be used in domestic hot water applications.