HeatBloC® MC43 - DN 40 (1½")

3-way mixing valve with integrated bypass 0-50 %
with integrated controller
Application range: for radiant floor heating from 3.5 kW, for low-temperature heating systems controlled by a mixing valve
Recommended application range:up to 125 kW; 20 K up to 5400 l/h

Manufacturer:

PAW GmbH & Co. KG
Böcklerstr. 11 31789 Hameln
Germany
info@paw.eu

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Technical data

Operating data

Max. operating temperature: 110 °C

Differential pressure sensors: 0-600 mbar

Dial thermometer: 0 - 120 °C

Output: 125 kW

Max. operating pressure: 6 bar

Temperature difference: 20 K

Kvs value: 17.7

Flow rate: 5400 l/h

Power consumption: 1.5 W

Equipment

Controller MCom 3.4: 24 Vdc, max. 200 mA Interface: Modbus RTU (integration into building control and SmartHome systems )

Check valves: 1 x 250 mm wc

Dial thermometer: 0 - 120 °C

Shut-off valves: Ball valves with handle

Temperature sensors: 1x Pt1000 in the flow and return

Differential pressure sensors: 0-600 mbar

Opening pressure check valve: 250 mm wc

Number of check valves: 1

Dimensions

Height: 790 mm

Width: 320 mm

Nominal diameter: DN 40 (1½")

Installation length: 560 mm

Connection generator: Flange DN 40 / PN 6

Connection consumer: 1½" int. thread

Centre distance: 160 mm

Materials

Valves and fittings: Brass

Gaskets: EPDM

Insulation: EPP

Electrical data (heating/actuators)

Setting time 90°: 140 s

Electrical connection: 24 V AC/DC

Torque actuator: 10 Nm

Power consumption: 1.5 W

Description

EnEV-compliant hydraulic balancing on the distribution manifold ...

Downloads

Product information

Safety instructions
The installation and commissioning as well as the connection of electrical components require technical knowledge commensurate with a recognised vocational qualification as a fitter for plumbing, heating and air conditioning technology, or a profession requiring a comparable level of knowledge [specialist].
The following must be observed during installation and commissioning:
- relevant local and national regulations
- accident prevention regulations of the professional association
- instructions and safety instructions mentioned in these instructions.

CAUTION
Personal injury and damage to property!
The product must only be used in heating circuits filled with heating water according to VDI 2035 / Ö-Norm H 5195-1. The product must not be used in domestic water applications.

NOTICE
Material damage due to mineral oils!
Mineral oil products cause lasting damage to seals made of EPDM, whereby the sealant properties get lost. We do not assume liability nor provide warranty for damage to property resulting from sealants damaged in this way.
- It is imperative to avoid that the EPDM sealing elements of the unit get in contact with substances containing mineral oils.
- Use a lubricant based on silicone or polyalkylene and free from mineral oils, such as Unisilikon L250L and Syntheso Glep 1 of the Klüber company or a silicone spray.