89 Produkte

89 Produkte

89 Produkte

  1. Floor bracket
    Floor bracket
    Components: 2 floor brackets (galvanized steel), 4 wall plugs, 4 screws, 2 screws for fixing the distribution manifold onto the floor brackets
    Height = adjustable 1050 - 1080 mm, for shortening simply cut off

    Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  2. System separation DN 25 (1") for HeatBloC®s
    System separation DN 25 (1") for HeatBloC®s
    Function: Separation of the boiler circuit and the consumer circuit

    Field of application:
    for radiant panel heating systems with plastic pipes for the protection of new boilers in older heating installations
    Recommended application range:
    Min. residual head: 1.5 m
    Temperature difference primary: 60-50 °C
    Temperature difference secondary: 35-45 °C

    Range of performance:
    depending on the pump of the heating circuit used and the amount of plates of the heat exchanger
    16 plates: up to 20 kW, 10 K up to 1720 l/h
    30 plates: up to 23 kW, 10 K up to 2010 l/h
    40 plates: up to 25 kW, 10 K up to 2150 l/h

    Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  3. Wall bracket DN 20
    Wall bracket DN 20
    Components: 2 wall bracket sets, mounting equipment Possible wall distance: 70-100 mm, distance: 15 mm
    For 5-fold modular distribution manifolds, we recommend to use two wall bracket sets. Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  4. Sealing for nut
    Sealing for nut
    asbestos-free
    outside diameter: 30 mm
    inside diameter: 21 mm
    height: 2 mm



    Learn More

    Valves/Fittings

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  5. Safety set DN 20
    Safety set DN 20
    for distribution manifolds DN 20,
    with self-sealing counter T-piece ¾" x ½",
    outlet ¾" with cap for expansion tank,
    pressure relief valve ½" x ¾", 3 bars, up to 50 kW,
    pressure gauge 0-4 bars

    Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  6. PAW actuator SR2
    PAW actuator SR2
    easy assembly and disassembly thanks to the smart PAW snap-in mechanism,
    with 1.5 m cable and mounting set for snap-in assembly on the PAW mixing valve,
    for weather-compensated control,
    due to the removable scale it is suited for the flow on the right or left side
    change-over switch for manual / automatic operation

    Learn More

    Valves/Fittings

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  7. Immersion sleeves ½" ext. thread
    Immersion sleeves ½" ext. thread
    for the installation of the temperature sensors (d = 6 mm) in the storage tank, in the collector and the hydraulic separator.

    Attention: suitable for ball valves until 2016!

    566001: self-sealing with, o-ring, polished brass, for sensor, T = 30 mm
    566002: standard, chromed brass, for sensor, T = 60 mm
    5660021: standard, chromed brass, with valve extension (25 mm), for sensor, T = 60 mm
    566003: standard, chromed copper, for sensor, T = 100 mm
    566004: standard, chromed copper, for sensor, T = 150 mm

    Learn More

    Solex|SolarBloC®

    Solar

    thermal

    systems

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  8. Contact thermostat 20-60 °C
    Contact thermostat 20-60 °C
    Contact thermostat for limiting the flow temperature, adjustable from 20 - 60 °C



    Learn More

    Valves/Fittings

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  9. Overflow set for HeatBloC®s DN 20
    Overflow set for HeatBloC®s DN 20
    with self-sealing counter-T-pieces and elbow gland, adjustment range 1-6 m wc, suitable for HeatBloC®

    Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

  10. Conversion kit for changing the flow
    Conversion kit for changing the flow
    The conversion kit for changing the flow line is mandatory for mixing valves K33 with bypass at the front. Learn More

    HeatBloC®

    Heating

    technology

    Prices are only visible for registered users.

    Our offer is exclusively aimed at corporate clients.

No further products