- Best quality
- Quick assembly
- Longevity
HeatBloC®
Heating
technology
HeatBloC® K38 DN 25 (1")
4-way mixing valve
Field of application: for heating systems controlled by a mixing valve in combination with a boiler temperature maintenance
Recommended application range:up to 33 kW; 20 K up to 1400 l/h
Field of application: for heating systems controlled by a mixing valve in combination with a boiler temperature maintenance
Recommended application range:up to 33 kW; 20 K up to 1400 l/h
Manufacturer:
Operating data
Max. operating temperature:
110 °C
Dial thermometer:
0 - 120 °C
Output:
33 kW
Max. operating pressure:
6 bar
Temperature difference:
20 K
Kvs value:
4.1
Flow rate:
1400 l/h
Equipment
Check valves:
1 x 200 mm wc
Dial thermometer:
0 - 120 °C
Shut-off valves:
Ball valves with handle
Opening pressure check valve:
200 mm wc
Number of check valves:
1
Dimensions
Height:
383 mm
Width:
250 mm
Nominal diameter:
DN 25 (1")
Installation length:
340 mm
Connection generator:
1½" ext. thread, flat sealing
Connection consumer:
1" int. thread
Centre distance:
125 mm
Materials
Valves and fittings:
Brass
Gaskets:
EPDM
Insulation:
EPP
Flat-sealing connections 1½" ext. thread
incl. 1½" union nut for the installation on a PAW modular distribution manifold.With PAW mounting equipment the heating circuit can be installed on wall brackets.
Large ball valve
easy handling, visible closing position
4-way mixing valve
completely made of brass, when installed individually it is suited for the operation of a boiler circuit pump (a change in the boiler circuit with closed flow line is possible).When installed on a distribution manifold the return line of the mixing valve must be equipped with a non return valve to avoid unwanted circulation.
For mounting actuators of other manufacturers, you need the adapter set item no. 705580.
PAW actuator SR5
with 1.5 m cable and mounting set for snap-in assembly on the mixing valve, suited for flow on the right or left side, change-over switch for manual / automatic operation, supply 230 V / 50 Hz, torque 5 Nm
EnEV-compliant functional insulation
made of durable elastic EPP, complete insulation of valves and fittings, ventilation opening to cool the pump
Free access to the pump head
by simply removing the front insulation shell
Check valve in the return pipe
can be opened, 200 mm wc, spring-loaded, thus suited for horizontal and overhead installation
Flow on the right = standard
Flow and return line can be changed on site, also for heating circuits with mixing valve
All water-carrying parts are made of brass
Full metal thermometers
can be pulled off, with immersion sleeve integrated in the ball valve
PAW heating pumps with high-efficiency (ECM) technology
fitted with 2 m cable, completely premounted, integrated in the insulation, pressure tested, with serial number, perfectly designed system, pump characteristics, EuP/ErP READY
Pump can be isolated,
so that it can be replaced without draining
incl. 1½" union nut for the installation on a PAW modular distribution manifold.With PAW mounting equipment the heating circuit can be installed on wall brackets.
Large ball valve
easy handling, visible closing position
4-way mixing valve
completely made of brass, when installed individually it is suited for the operation of a boiler circuit pump (a change in the boiler circuit with closed flow line is possible).When installed on a distribution manifold the return line of the mixing valve must be equipped with a non return valve to avoid unwanted circulation.
For mounting actuators of other manufacturers, you need the adapter set item no. 705580.
PAW actuator SR5
with 1.5 m cable and mounting set for snap-in assembly on the mixing valve, suited for flow on the right or left side, change-over switch for manual / automatic operation, supply 230 V / 50 Hz, torque 5 Nm
EnEV-compliant functional insulation
made of durable elastic EPP, complete insulation of valves and fittings, ventilation opening to cool the pump
Free access to the pump head
by simply removing the front insulation shell
Check valve in the return pipe
can be opened, 200 mm wc, spring-loaded, thus suited for horizontal and overhead installation
Flow on the right = standard
Flow and return line can be changed on site, also for heating circuits with mixing valve
All water-carrying parts are made of brass
Full metal thermometers
can be pulled off, with immersion sleeve integrated in the ball valve
PAW heating pumps with high-efficiency (ECM) technology
fitted with 2 m cable, completely premounted, integrated in the insulation, pressure tested, with serial number, perfectly designed system, pump characteristics, EuP/ErP READY
Pump can be isolated,
so that it can be replaced without draining
This product does not require any product safety instructions.