Accessories SolarBloC® DN 25
-
Hand filling pump with fill and drain valve½" external thread,
15 mm hose connection,
attainable pressure up to approx. 4 bars,
length 225 mm Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
-
Hand filling pump without fill and drain valve½" external thread,
15 mm hose connection,
attainable pressure up to approx. 4 bars,
length 225 mm Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
-
Hose connectorHose connector for hand filling and injection pump ½" x 15 mm Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
-
Stainless-steel corrugated hose SolarflexIdeal for the roof part leading to the collector. Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
-
Flush and fill unit DN 25consisting of:
Brass ball valve internal thread 1",
with red butterfly handle,
with 2 outlets ½" before and after the ball,
2 self-sealing fill and drain valves with hose connector 15 mm
56431, 56441, 56451, 56461: additionally with 2 cutting-ring compression fittings with support sleeve, premounted Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
-
Flush and drain unit DN 25Counter T-piece with self-sealing fill and drain valve.For extending the solar station with a flush and drain connection or for installation at the lowest point (drain unit).
Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
-
Hand refractometerThe hand refractometer measures the anti-freeze safety of water-propylene glycol and water-ethylene glycol mixtures in solar thermal installations.
It can also be used to determine the density of water-battery acid mixtures.
Only one or two drops of the fluid are sufficient.
Measuring ranges:
propylene glycol: 0 - 50 °C
ethylene glycol: 0 - 50 °C
battery acid: 1.10 - 1.40 g/cm³ Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
-
Solar pressure gaugewith automatic isolation,
solar version up to 130 °C,
measuring range: 0-6 bar
diameter: d = 50 mm Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.
-
2-way zone valve DN 25/32for connecting and disconnecting single storage tanks,
DN 25, 1" int. thread, setting time for 90°: 30 sec.
DN 32, 1¼" internal thread, setting time 90°: 30 s Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Out of stockOur offer is exclusively aimed at corporate clients.
-
Immersion sleeves ½" ext. threadfor the installation of the temperature sensors (d = 6 mm) in the storage tank, in the collector and the hydraulic separator.
Attention: suitable for ball valves until 2016!
566001: self-sealing with, o-ring, polished brass, for sensor, T = 30 mm
566002: standard, chromed brass, for sensor, T = 60 mm
5660021: standard, chromed brass, with valve extension (25 mm), for sensor, T = 60 mm
566003: standard, chromed copper, for sensor, T = 100 mm
566004: standard, chromed copper, for sensor, T = 150 mm Learn MoreSolex|SolarBloC®
Solar
thermal
systems
Our offer is exclusively aimed at corporate clients.